Gazebo與ROS版本說明

使用哪種ROS / Gazebo版本的組合

介紹

安裝Gazebo

注意，如果你使用默認分支，你可能不是二進制兼容任何發布的軟件包，所以你需要一個catkin工作區，以獲得一個有效的gazebo_ros_pkgs。

使用ROS分發的默認Gazebo版本

ROS Indigo主機是2.x版本的Gazebo。對于完全集成的ROS系統，我們建議使用2.x版本的Gazebo。繼續的方式只是使用ROS存儲庫（它將自動安裝gazebo2），并且不使用osrfoundation存儲庫。

常問問題

我根本不使用ROS，我應該使用哪個版本？

如果您不需要ROS支持，推薦的版本是可以使用osrfoundation repo安裝的最新發布的版本。

我想使用bullet / simbody / dart物理引擎，我應該使用哪個版本的Gazebo？

從gazebo4開始，bullet和simbody支持內置在Ubuntu包中，因此請按照上述說明使用gazebo4和ROS。 Dart仍然需要從源碼安裝gazebo（從gazebo3開始），因此您可以使用gazebo3或更高版本，并按照本頁上面的說明使其與ROS配合使用。

我需要使用gazebo5 / gazebo6 / gazebo7和ROSIndigo，我能做什么？

如果你需要一些功能只存在于版本5.x，6.x或7.x的Gazebo，有一種方法來安裝gazebo5，gazebo6或gazebo7和ROSIndigo。請按照說明，關于如何使用ROS與gazebo4，gazebo5或gazebo6在同一個文檔。

我需要使用gazebo6 / gazebo7和ROSJade，我能做什么？

如果你需要一些功能只存在于版本6.x / 7.x的Gazebo，有一種方法來安裝gazebo6或gazebo7和ROSJade。請按照同一文檔中關于如何使用ROS與gazebo6軟件包的說明。

一些ROS包與GazeboX ROS Wrappers沖突！

如果在嘗試安裝本文檔中描述的某個版本之后發現依賴性沖突（例如使用RVIZ），您將需要從源代碼安裝ROS或Gazebo。

官網原文，翻譯爲谷歌翻譯。

Introduction

This document provides an overview about the options to use different versions of ROSin combination with different versions of Gazebo.It is recommended to read it before installing the Gazebo ROS wrappers.

Important! simple analysis for a quick and correct decision

If you are planning on using a specific version of ROS and don't have a reasonto use a specific version of Gazebo, you should proceed with theInstalling gazebo_ros_pkgstutorial which explains how to install the fully supported version of gazeboby ROS.

Warning: note that using a different gazebo version than the official version delivered from the ROSrepositories could end up in conflicts or other integration problems with ROS packages.

Gazebo versions and ROS integration

Gazebo is an independent project like boost, ogre orany other project used by ROS. Usually, the latest major version of gazeboavailable at the beginning of every ROS release cycle (for example gazebo5for ROS Jade) is selected as the official one to be fully integrated andsupported and will be kept during the whole life of the ROS distribution.

Gazebo development is not synced with ROS, so each new major version of Gazebomust be released before being used in a ROS distribution. The followingsections cover how to use ROS with different versions of Gazebo.

Note that Gazebo ABI stability policy follows thesemantic versioning philosophy, in which all versionsthat have the same major number (gazebo_6.0.0, gazebo_6.1.0,gazebo_6.0.1, ...) are binary compatible and thus interchangeable when usingthe same ROS distro.

Installing Gazebo

Gazebo Ubuntu packages

The easiest way of installing Gazebo is to use packages. There are two main repositories which host Gazebo packages: one is packages.ros.org and the other is packages.osrfoundation.org. At the time of writing:

packages.ros.org

Indigo: host gazebo version 2.x package.

Jade: host gazebo version 5.x package.

packages.osrfoundation.org

gazebo 5.x series (package name gazebo5)

gazebo 6.x series (package name gazebo6)

gazebo 7.x series (package name gazebo7)

This means that including the osrfoundation repository is not strictly needed to get the Gazebo Ubuntu package.It can be installed from the ros repository.

Gazebo built from source

If you have compiled a gazebo version from source, note that depending on therepository branch used (gazebo6,gazebo7,...) your gazebo will bebinary compatible with the gazebo_ros_pkgs (and all other ROS packages compiledon top of gazebo) only if the major version matches your local branchrepository and the gazebo version used in your ROS distro. For example, if youare compiling from gazebo branch gazebo_2.0, you can use the gazebo_ros_pkgspresent in Indigo (which uses gazebo2 series).

Note that if you are using default branch, you are probably not binarycompatible with any of the packages released, so you will need a catkinworkspace for getting a valid gazebo_ros_pkgs.

Using the default Gazebo version for a ROS distribution

For the users that need to run a specific version of ROSand want to use all the gazebo ROS related packages out-of-the-box,this is the recommended section:

Jade

ROS Jade hosts the 5.x version of Gazebo.For a fully-integrated ROS system, we recommend using the 5.x version ofGazebo. The way to proceed is just to use the ROS repository (it willautomatically install gazebo5) and do not use the osrfoundationrepository.

Indigo

ROS Indigo hosts the 2.x version of Gazebo.For a fully-integrated ROS system, we recommend using the 2.x version of Gazebo.The way to proceed is just to use the ROS repository (it will automatically install gazebo2)and do not use the osrfoundation repository.

Using a specific Gazebo version with ROS

Warning!: Using this option, you won't be able to use any ROS Ubuntu packagerelated to Gazebo from ROS deb repository. The equivalent of gazebo_ros_pkgscan be installed from debian packages, but all other software (such asturtlebot_gazebo) must be built fromsource. Thanks to catkin workspacesthis is quite easy to do.

There is a way of using any specific version of gazebo and ROS if really needed:

Gazebo 7.x series

The OSRF repository provides -gazebo7- versions of ROS/Indigo and ROS/Jadegazebo wrappers (gazebo7_ros_pkgs) which are built on top of the gazebo7package. The steps to use them are:

Add the osrfoundation repository to your sources list.

Install ros-$ROS_DISTRO-gazebo7-ros-pkgs from the osrfoundation repository, which will install the gazebo7 package.

Use catkin workspaces to compile the rest of the software used from source.

Gazebo 6.x series

The OSRF repository provides -gazebo6- versions of ROS/Indigo and ROS/Jadegazebo wrappers (gazebo6_ros_pkgs) which are built on top of the gazebo6package. The steps to use them are:

Add the osrfoundation repository to your sources list.

Install ros-$ROS_DISTRO-gazebo6-ros-pkgs from the osrfoundation repository, which will install the gazebo6 package.

Use catkin workspaces to compile the rest of the software used from source.

Gazebo 5.x series

The OSRF repository provides -gazebo5- versions of ROS/Indigo gazebo wrappers(gazebo5_ros_pkgs) which are built on top of the gazebo5 package.The steps to use them are:

Add the osrfoundation repository to your sources list.

Install ros-indigo-gazebo5-ros-pkgs from the osrfoundation repository, which will install the gazebo5 package.

Use catkin workspaces to compile the rest of the software used from source.

FAQ

If you don't need ROS support, the recommended version is the latest released version that can beinstalled using the osrfoundation repo.

Starting from gazebo4, bullet and simbody support is built into the Ubuntu package,so please follow the above instructions to use gazebo4 in combination with ROS.Dart still requires gazebo installation from source (starting from gazebo3),so you can use gazebo3 or above and follow the instructions above in this page to make it work with ROS.

Warning!: Using this option, you won't be able to use any ROS Indigo package related to Gazebo from ROS deb repository. The way to go is to build them from source. Thanks to catkin workspaces this is quite easy to do.

If you need some features only present in version 5.x, 6.x or 7.x of Gazebo,there is a way of installing gazebo5, gazebo6 or gazebo7 and ROS Indigo.Please follow the instructions about how to use ROS with gazebo4, gazebo5 orgazebo6 which are in this same document.

Warning!: Using this option, you won't be able to use any ROS Jade packagerelated to Gazebo from ROS deb repository. The way to go is to build them fromsource. Thanks to catkin workspaces this is quite easy to do.

If you need some features only present in versions 6.x/7.x of Gazebo,there is a way of installing gazebo6 or gazebo7 and ROS Jade. Pleasefollow the instructions about how to use ROS with gazebo6 packagewhich are in this same document.

Note that each ROS distribution is designed to be used with an specific versionof Gazebo (gazebo5 in Jade). When someone chooses to use a different versionof Gazebo than the one recommended in the ROS distribution, problems may appearand some of them could be unsolvable.

If you a find a dependency conflict (for example with RVIZ) after trying toinstall one of the versions described in this document, you will need toprobably install ROS or Gazebo from source.

Jade Ubuntu

版權聲明：本文內容由網絡用戶投稿，版權歸原作者所有，本站不擁有其著作權，亦不承擔相應法律責任。如果您發現本站中有涉嫌抄襲或描述失實的內容，請聯系我們jiasou666@gmail.com 處理，核實后本網站將在24小時內刪除侵權內容。